Notice AXIS 206

« n IP address - see Installation Methods, on page 4. For more information, please see the User?s Manual, which is available on the CD included in this package. Updated versions can be obtained from www.axis.com Page 4 AXIS 206 Quick Installation Guide Mounting 1.If required, use the 3 supplied screws to fix the base plate to a flat surface. 2.To use the shorter stand, unscrew the lock ring to release the camera, and remove the extension section. 3.Re-attach the camera, adjust the angle and gently tighten the lock ring. Important! Cable Connections 1.Using the self-adhesive strip, attach the supplied cable clip to the rear panel and fasten the power cable to it. This will prevent accidental cable disconnection. 2.Connect the power adapter to the camera. 3.Connect the AXIS 206 to the network using a standard RJ-45 network cable. Installation Methods The AXIS 206 is designed for installation on an Ethernet network. This involves assigning it an IP address, automatically (via e.g. DHCP) or manually. Several installation methods are available. The one to use depends on how your network is configured. If unsure of the method to use, please consult your network administrator, or see the documentation for your network. ?If you are using e.g. a home broadband router, you may find it convenient to view the router?s administration pages to discover which IP address has been assigned to your AXIS 206. Please consult the router?s documentation for further information. ?If your network has an Internet connection (with no HTTP proxy) and uses a DHCP server to assign IP addresses, use the One-Click installation procedure. See page 5. ?If your network uses automatic IP addressing (DHCP) and your computer uses the UPnPTM service, the AXIS 206 will automatically be detected and displayed on your screen. See page 6 for more information. ?Use the AXIS IP Utility (see page 6) to discover the IP address. This can also be used to set the IP addess manually. ?Set the IP address manually with the ARP/Ping method, as described on page 7. The AXIS 206 is designed for indoor use only, and must always be positioned where it is not exposed to direct sunlight or strong halogen light, which can cause permanent damage to the camera?s image sensor. Damage as a result of exposure to strong light is not covered by the Axis warranty. Lock ring Wall mounting AXIS 206 Quick Installation GuidePage 5 ENGLISH One-click Installation Requirements: The AXIS Internet Dynamic DNS Service Follow these instructions: 1.Once the network and power cables have been connected, wait for the Status indicator to show a steady green. 2.Now press the Control button on the rear of the camera once. The Status indicator on the front of the camera will blink green while it connects to the AXIS Internet Dynamic DNS Service. 3.Wait for the Status indicator to go back to showing a steady green. 4.To complete the installation, now visit www.axiscam.net from an Internet connected PC. This must be done within 60 minutes of pressing the Control button. 5.Follow the on-screen instructions provided by the AXIS Internet Dynamic DNS Service. 6.Please see page 7 for instructions on how to set the language and the password. Notes: 7. ?You will need the camera?s serial number (S/N) to perform the installation. This is found on the label on the rear panel. See page 3. ?If this installation was unsuccessful, try one of the other method... »