Notice PHILIPS 6917160PH disponible gratuitement après inscription

Extrait de la notice

t "on" setting. If you would like to disconnect a LivingWhites product from the remote, bring the remote close to the product, then press and hold the "0" button. The lamp will flash 3 times. Hold the "0" button until you hear a beep from the remote. The lamp will now slowly fade to off. 3. You can also connect your remote control to another remote control from the Philips LivingAmbiance range. Any LivingColors or LivingWhites remote with a SmartLink logo on it can be connected to your remote control. Connecting another remote control will allow you to control the same lamps with two different remotes. You could, for example, create 6 different lighting scenes—3 on one remote and 3 on the other—with the same lamps. To add an extra LivingColors or LivingWhites remote control, do the following: a. Reset the remote control you would like to add: open its battery compartment and press the RESET button for a few seconds (e.g. with a paper clip). Make sure that the batteries are in. The remote will play a sound to show it has been reset. b. Hold the remote you have reset close to your current remote. Press the "I" button on both remotes until the remotes play a sound. The remotes are now connected – this means that you can now connect the same lamps to the new remote control and control all lamps with either of the remotes. c. If the remote you are adding is round, you can now also copy it: you can immediately have it connected to the same lamps your original remote is connected to. In order to copy the remote, repeat the procedure described in point b. Once you have connected one or more lamps to your Philips LivingColors remote control, you can control all of these lamps together or each one in...