Notice PHILIPS RQ1075 disponible gratuitement après inscription

Extrait de la notice

em. ENGLISH17 2 Put the adapter in the wall socket. ,The holder automatically moves to the highest position. 3 Simultaneously press the release buttons on both sides of the cleaning chamber (1). Then lift the Jet Clean System off the cleaning chamber (2). ,The cleaning chamber remains behind. 4 Unscrew the cap from the bottle with cleaning ?uid and remove the airtight seal. 5 Fill the cleaning chamber with HQ200 cleaning ?uid up to the MAX indication. 6 Place the Jet Clean System back onto the cleaning chamber. Make sure the release buttons click back into place. Using the Jet Clean System 1 Place the shaver in the holder. ,The display shows that the shaver is charging (see chapter ‘The display’). 2 Press the on/off button on the Jet Clean System to start the cleaning program. ,The shaver display stops showing the charging indication. ENGLISH18 ,The cleaning light starts to ?ash and the shaver is automatically lowered into the cleaning ?uid. ,The cleaning light ?ashes throughout the cleaning program, which takes 4 to 6 minutes, depending on the cleaning program. ,During the ?rst phase of the cleaning program, the shaver automatically switches on and off several times and moves up and down. ,During the second phase of the cleaning program, the shaver is placed in the drying position, indicated by a ?ashing drying symbol. This phase takes approx. 2 hours. The shaver stays in this position until the end of the program. ,After the cleaning program, the charging indication appears on the shaver display (see chapter ‘The display’). Note: If you press the on/off button of the Jet Clean System during the cleaning program, the program aborts and resets. In this case, the cleaning or...