Notice AXIS 221 disponible gratuitement après inscription

Extrait de la notice

HTTP proxy. See www.axiscam.net for more information. ARP/PingAllSee below. The command must be issued within 2 minutes of connecting power to the camera. View DHCP server admin pages AllTo view the admin pages for the network DHCP server, see the server’s own documentation. Windows syntaxWindows example arp -s <IP Address> <Serial Number> ping -l 408 -t <IP Address> arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125 UNIX/Linux/Mac syntaxUNIX/Linux/Mac example arp -s <IP Address> <Serial Number> temp ping -s 408 <IP Address> arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -s 408 192.168.0.125AXIS 221/223M Installation GuidePage 13 ENGLISH ENGLISH ENGLISH Unit connectors Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet. Using shielded cables is recommended. Power connector - For the supplied power adapter, PS-K, 9W. The center pin is positive (+). Audio in - 3.5mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal). Audio out - Audio output (line level) that can be connected to a public address (PA) system or an active speaker with a built-in amplifier. A pair of headphones can also be attached. A stereo connector must be used for the audio out. Note: Audio connectors are present only in AXIS 223M. 10 pin I/O terminal connector block Pin Function Description 1Output AOn the external device output terminals (A and B), there is no distinction between positive and negative (+ and -). The terminals use a photocoupler and are electrically isolated from the other internal circuitry. The maximum load should not exceed 100mA and the max- imum voltage should be not more than 50 VDC or 35 VAC. 2Output B 3Digital Input 1 Photocoupler...