Notice HAGEN Fluval 404 Aquastop disponible gratuitement après inscription

Extrait de la notice

l/70 U.S. Gal. 400 l/100 U.S. Gal. Pump Output 480 l/h-125 U.S. g/h680 l/h-180 U.S. g/h1000 l/h-260 U.S. g/h1300 l/h-340 U.S. g/h Mechanical Area 36,800 mm256,000 mm256,000 mm276,300 mm2 Biological Volume 1,37l2,0 l3,1 l4,2 l Filtration Volume 3,2 l4,6 l6,6 l8,5 l Filter Circulation* 330 l/h-85 U.S. g/h420 l/h-110 U.S. g/h710 l/h-185 U.S. g/h850 l/h-225 U.S. g/h Water Column Height (max.)1,35 m1,35 m1,60 m2,05 mInstallation Instructions *NOTE* READ ALL INSTRUCTIONS BEFORE ATTEMPTING TO INSTALL FILTER There are no tools required to install, maintain or operate the Fluval system. DO NOT PLUG IN FILTER UNTIL UNIT IS FILLED WITH WATER (see step 30). Recommendation: Top up water in aquarium before commencing. Assembly (*All letter references apply to front cover drawings) 1)Verify that all components are present. (Refer to front cover). 2)Install feet. – Press one foot (A) into each of the four corners at the bottom of the filter case. PREPARING THE FILTER 3)Remove Motor Housing (B) from filter case. 4)Remove Foam Screen Frame (C) and Media Baskets (D) from filter case. 5Rinse both sides of the Foam Screen Frame (C) under tap water to remove any possible contaminants before initial use. 6 Replace Foam Screen Frame (C) in filter case. Refer to drawing for proper placement. 7)Fill provided media in appropriate media baskets. (See inside front cover for recommended placement). Remove plastic bags from filter media before placing them (do not remove carbon from porous bags). NOTE: The media placement indicated on the front cover of the booklet is only a recommendation. For optimum media efficiency, read “Filter Media” section. 8Rinse all media under tap water to remove any dust or debris before initial use. 9)Replace Media Baskets (D) in...