a location where you do not spend much time, for example in the hallway. Avoid setting it up in your or your children's bedrooms or the lounge. 2Installation 2.1Commissioning the base station Perform the following steps: •Plug the mains adapter into a 230 V socket. Plug the connector into the adapter jack on the bottom of the base station. •Connect the telephone jack on the bottom of the base station to the telephone socket using the supplied telephone cable. 1.Telephone wall socket 2.Telephone cable 3.Bottom of the base station 4.Mains adapter cable Make sure the batteries are charged before using your telephone for the first time, otherwise the device will not operate optimally. Take account of the safety notes about the environment and circumstances of the installation and location! Do not commission the device in an environment with a risk of explosions! 1 4 3 29 Butler Outdoor 2010 - Twin - TripleInstallation ENGLISH 2.2Charger (only Twin or triple version) Perform the following steps: Plug the mains adapter into a 230 V socket. Plug the connector into the adapter jack on the bottom of the charging station. 1.Bottom of the charging station 2.Mains adapter cable 2.3Handset activation 1.Remove the cardboard spacer. 2.Press the activation pin according to the direction on the label. •After activation it takes about 10 seconds before the display turns on. 3.Remove the label ones the handset is activated. 1 2 Risk of injury due to explosion! Only use the supplied rechargeable batteries type (BT-800 2,4V DC). No need to install the batteries!! The batteries are already inside the handset. A switch at the bottom of the handset has disconnect the battery to avoid discharging. You first have to press...