Notice IQUA BHS-303

« e phone. If you want to use the BHS-303 with another mobile phone, you must repeat the pairing process. Even though BHS-303 can be paired with up to 8 compatible phones it can only be connected to one phone at a time. Once it is paired with 8 phones, the 9th paired device will replace the 1st paired device. 1. When the headset is powered off, press and hold the Multifunction -button until the green light starts ? ashing rapidly. 2. Release the button. BHS-303 is now in pairing mode, waiting for your mobile phone to contact it. 3. Complete the pairing with your mobile phone. Please refer your mobile phone manual for details on how to search and pair. When phone has found the headset, it will show Iqua BHS-303 on its screen. In order to pair with the phone, enter the PIN code 0000. 4. After pairing, BHS-303 will automatically connect to your mobile phone. After pairing, some phones do not automatically connect to the headset. If this is the case, please ensure that you connect the phone to the headset (please refer to your mobile phone manual). Once pairing and connection are completed, the green light ? ashes twice every 8 seconds. * For latest compatibility information please visit www.iqua.com Disconnecting BHS-303 and your phone Easiest way to disconnect BHS-303 and your phone is simply switch off the BHS-303. Reconnecting the paired headset to a compatible phone To reconnect the BHS-303 to the last connected phone, simply switch on the headset and it will automatically connect to your phone. Call Functions Answer a call When you receive a call, you hear a ringing tone through the headset. Press the Multifunction -button brie? y to answer the incoming call. You will hear a tone once the call is answered. End a call To end an active call, press shortly the Multifunction -button. You will hear a tone when the call is ended. Reject a call When you receive an incoming call that you do not want to answer, press and hold the Multifunction -button to reject. Redial the last dialed number To place a call to the last dialed number, double press the multifunction- button when no call is in progress. You will hear a high tone. Please note some phone models do not support redial. Voice dialing (when supported by the phone) To activate a voice dialing feature of your phone, press the Multifunction -button brie? y when there is no call in active. You can hear a high tone. This will indicate that you can start saying the voice tag. Refer to the mobile phone manual for details. Please note, some phone models do not support voice dialing. Light indication summary The BHS-303’s LED light is green and usually accompanied by a sound signal. Power on but no Bluetooth connection Green light ? ashes once every 3 seconds Bluetooth connection on Green light ? ashes twice every 8 seconds Battery low Green light ? ashes twice every 3 seconds, and a low tone is played Battery charging Green light is on continuously Power management This product is powered by a built-in rechargeable battery which can not be changed. Do not attempt to replace the battery. Rechargeable battery can be charged and discharged hundreds of times, but it will eventually wear out. After a period of time that will vary depending on the use and usage conditions you may ? nd that the built-in battery wil... »